MASK 003 - Injex Ultra

Additional Information

Story

An experimental non-medical mask with a box pleat, using Injected Linen and Ultra Ultra fabrics. This mask combines lightweight shielding plus lightweight filtering. Linen against the face helps reduce humidity in the mask. Available in X-Back (over-the-head) and Y-Back (around-the-face) setups.

A detailed comparison between the X-Back and Y-Back setups can be found at the bottom of this page.

Due to sanitary reasons this item is not returnable or refundable.

Fabric

Our Injected Linen and Ultra Ultra combined into an easy to wear mask pairing. The Ultra Ultra is on the outside and combines lightweight shielding (with a 200mm water column) and lightweight filtering due to it's dense doubleweave construction. The Injected Linen goes against the face and adds an additional light filtering layer plus humidity control due to its linen content.

Details

Mask 003 - Injex Ultra

Face made with Ultra Ultra, 90% Nylon, 10% Elastane, 130gsm

Lining made with Injected Linen, 59% Linen, 41% Polyester, 165gsm

Box pleat expansion

Internal aluminum nose bridge

3Bar Slider adjust

Total weight of 20g

Wash before wear

Machine wash warm and tumble dry low

Made in New York City with Japanese and Swiss fabric

Sizing

One size. Please refer to the table below for measurements.

Approximate measurements in inches

Size	One size
Width (flat)	8.5
Length (flat)	3.25
Length (expanded pleats)	6
Max Circumference	32

Colors

Black