Additional Information
- Story
- Tailored construction meets the structure, stretch and snap of our 60/30
Cloth. The classic looks of a cotton blazer with the freedom of movement
only technical fabrics can gift us.
A sticking point for this blazer to be born was functionality. So we designed this blazer with two front welt pockets, a front breast pocket and interior chest pocket. Tailored details include a notched lapel and center back vent. A two piece pitched sleeve, hidden functional sleeve buttons and three front buttons finish off the classic look.
We've experimented with a lot of fabrics for blazers, but the 60/30 Cloth is our favorite yet. The crux of this fabric is in its *snap*. It's a four-way stretch fabric, giving it a great freedom of movement, but more than that it has a real density and structure. A great sport coat feels like a piece of lightweight armor, and always looks sharp, and the 60/30 Cloth is the only fabric we've found that can get that feeling, get that look and at the same time give you the ability to move freely. On top of that, this is a NanoSphere treated cloth, made of a carefully calibrated combination of cotton (64%) micronylon (29%) and stretch fibers (the last 7% is elastane). What this all means is this fabric is tougher than your average cotton, and also stays cleaner and dries faster, making for an amazing piece to take on the road. - Fabric
-
We call this fabric 60/30 Cloth in homage to the fabric that Sierra Design named their killer 60/40 Parkas after. Back in 1968, George Marks and Bob Swanson honed in on a 58% cotton, 42% nylon blend fabric as the ideal balance of handfeel, durability, water resistance and breathability. They rounded the numbers to 60/40 for marketing purposes and went on to make the iconic jacket of 1970's era hiking and camping.
We wanted to find something that could offer not only the handfeel of a classic cotton twill and durability of a hiking parka, but also a four-way stretch for true freedom of movement - something that’s simple yet suited for the grit and motion of real life. The result is our best demonstration of invisible technology in action. Our combination of 64% cotton, 29% micro-denier nylon and 7% elastane keeps the familiar look and feel of cotton while boasting the strength of nylon and the stretch of elastane. A "self-cleaning" NanoSphere® treatment tops it off to give the fabric extra water and dirt resistance as well as quick drying properties.
Then we rounded the numbers off like Marks and Swanson and the Outlier 60/30 Cloth was born. It’s a durable, breathable material you’ll want to wear every day. - Details
-
- 60/30 Class Cut Blazer
- Made with Outlier 60/30 Cloth
- Woven by Schoeller in Switzerland
- 64% cotton, 29% nylon, 7% elastane
- 325gsm
- Four-way stretch twill weave
- Nanosphere® "self-cleaning" treatment
- Light dirt and water resistance
- Quick drying
- Unstructured
- Three front custom engraved horn buttons
- Notch collar lapel
- Two piece pitched sleeve
- Hidden functional sleeve buttons
- Two front welt pockets
- Breast welt pocket
- Interior pocket
- Center back vent
- A tailored slim fit, if between sizes consider sizing up.
- Dry clean only, low iron if needed
- Made in New York City
- 60/30 Class Cut Blazer
- Sizing
-
A tailored slim fit, if between sizes consider sizing up.
Please refer to the table below for garment's exact measurements.
Garment measurements in inches, measured flatSize XS S M L Shoulder 13.5 14 14.5 15 Length high shoulder to bottom 21.75 22.25 23 23.75 Sleeve length CENTER BACK TO CUFF 31 31.5 32 32.5 - Colors
-
Midnight Gray
OUTLIER FABRICS
Simple and suited for the grit and repetitive motion of real life, 60/30 Cloth is a fabric you’ll want to wear everyday all the while staying durable and breathable.
We call this fabric 60/30 Cloth in homage to the fabric that Sierra Design named their killer 60/40 Parkas after. Back in 1968, George Marks and Bob Swanson honed in on a 58% cotton, 42% nylon blend fabric as the ideal balance of handfeel, durability, water resistance and breathability. They rounded the numbers to 60/40 for marketing purposes and went on to make the iconic jacket of 1970's era hiking and camping.
We wanted to find something that could offer not only the handfeel of a classic cotton twill and durability of a hiking parka, but also a four-way stretch for true freedom of movement - something that’s simple yet suited for the grit and motion of real life. The result is our best demonstration of invisible technology in action. Our combination of 64% cotton, 29% micro-denier nylon and 7% elastane keeps the familiar look and feel of cotton while boasting the strength of nylon and the stretch of elastane. A "self-cleaning" NanoSphere® treatment tops it off to give the fabric extra water and dirt resistance as well as quick drying properties.
Then we rounded the numbers off like Marks and Swanson and the
Outlier 60/30 Cloth was born. It’s a durable, breathable
material you’ll want to wear every day.